š Up to 70% Off Selected ItemsShop Sale
AM-002 carbine replica
A series of the latest Amoeba Airsoft replicas is based on a well-known design of AR type assault rifles, however these replicas have been considerably modified and enriched of many constructional details and interesting technical solutions, which improve not only their functionality but also their look. Thanks to its compact dimensions, AM-002 is very handy and constitutes a perfect tool during airsoft CQB actions.
The replica"s receiver was made of strengthened nylon. Quality of the materials used results in the fact that it is very difficult to recognise on the first sight whether it"s plastic or metal. Effective signs of a model, calibre and Amoeba Airsoft"s logo were engraved on the receiver. Metal was used to produced the outer barrel, the flash hider, the stock tube and some small pieces. The pistolĀ grip, properly shaped, covered with non-slip texture which improves grip and comfort. The magazine release button was enlarged in order to make its usage easier.
The replica was equipped with a light plastic stock folded to the side. The battery is located in the upper part of the receiver. Access to a hop-up system regulation is achieved in a standard for this design way - by pulling the charging handle and opening the shell ejector..
On the 22mm RIS rail is situated on the top of the gun can mount tactical scope.
The outer barrel ends with a 14mm right-hand thread.
Amoeba Airsoft replicas make it possible to replace the spring quickly, with no necessity of dismantling the gearbox. The heart of the replica is a bit strengthened modified gearbox v. 2, which possesses an integrated EFCS module - Electronic Firing Control System. It controls the operation of the trigger mechanism, resulting in a very smooth work and shorter engine reaction. A standard trigger switch assembly was replaced by an electronic system. The EFCS also has a built-in MOSFET system.
EFCS considerably increases the mechanism"s life span and the whole replica as well and it allows to use high-voltage batteries, including LiPo. If we buy an outer dedicated EFCS programmer, we may receive a possibly to select fire modes as well as the burst mode (a three BBs series).
The magazine which goes together with the replica is a hi-cap with capacity of 300 BBs. The magazine "s case was made of steel.
The set does not include a battery and a charger.
The set includes_
- replica
- magazine
- manual
The replica"s receiver was made of strengthened nylon. Quality of the materials used results in the fact that it is very difficult to recognise on the first sight whether it"s plastic or metal. Effective signs of a model, calibre and Amoeba Airsoft"s logo were engraved on the receiver. Metal was used to produced the outer barrel, the flash hider, the stock tube and some small pieces. The pistolĀ grip, properly shaped, covered with non-slip texture which improves grip and comfort. The magazine release button was enlarged in order to make its usage easier.
The replica was equipped with a light plastic stock folded to the side. The battery is located in the upper part of the receiver. Access to a hop-up system regulation is achieved in a standard for this design way - by pulling the charging handle and opening the shell ejector..
On the 22mm RIS rail is situated on the top of the gun can mount tactical scope.
The outer barrel ends with a 14mm right-hand thread.
Amoeba Airsoft replicas make it possible to replace the spring quickly, with no necessity of dismantling the gearbox. The heart of the replica is a bit strengthened modified gearbox v. 2, which possesses an integrated EFCS module - Electronic Firing Control System. It controls the operation of the trigger mechanism, resulting in a very smooth work and shorter engine reaction. A standard trigger switch assembly was replaced by an electronic system. The EFCS also has a built-in MOSFET system.
EFCS considerably increases the mechanism"s life span and the whole replica as well and it allows to use high-voltage batteries, including LiPo. If we buy an outer dedicated EFCS programmer, we may receive a possibly to select fire modes as well as the burst mode (a three BBs series).
The magazine which goes together with the replica is a hi-cap with capacity of 300 BBs. The magazine "s case was made of steel.
The set does not include a battery and a charger.
The set includes_
- replica
- magazine
- manual
Product Information
Product Information
Shipping & Returns
Shipping & Returns
AM-002 carbine replica
AM-002 carbine replica
A series of the latest Amoeba Airsoft replicas is based on a well-known design of AR type assault rifles, however these replicas have been considerably modified and enriched of many constructional details and interesting technical solutions, which improve not only their functionality but also their look. Thanks to its compact dimensions, AM-002 is very handy and constitutes a perfect tool during airsoft CQB actions.
The replica"s receiver was made of strengthened nylon. Quality of the materials used results in the fact that it is very difficult to recognise on the first sight whether it"s plastic or metal. Effective signs of a model, calibre and Amoeba Airsoft"s logo were engraved on the receiver. Metal was used to produced the outer barrel, the flash hider, the stock tube and some small pieces. The pistolĀ grip, properly shaped, covered with non-slip texture which improves grip and comfort. The magazine release button was enlarged in order to make its usage easier.
The replica was equipped with a light plastic stock folded to the side. The battery is located in the upper part of the receiver. Access to a hop-up system regulation is achieved in a standard for this design way - by pulling the charging handle and opening the shell ejector..
On the 22mm RIS rail is situated on the top of the gun can mount tactical scope.
The outer barrel ends with a 14mm right-hand thread.
Amoeba Airsoft replicas make it possible to replace the spring quickly, with no necessity of dismantling the gearbox. The heart of the replica is a bit strengthened modified gearbox v. 2, which possesses an integrated EFCS module - Electronic Firing Control System. It controls the operation of the trigger mechanism, resulting in a very smooth work and shorter engine reaction. A standard trigger switch assembly was replaced by an electronic system. The EFCS also has a built-in MOSFET system.
EFCS considerably increases the mechanism"s life span and the whole replica as well and it allows to use high-voltage batteries, including LiPo. If we buy an outer dedicated EFCS programmer, we may receive a possibly to select fire modes as well as the burst mode (a three BBs series).
The magazine which goes together with the replica is a hi-cap with capacity of 300 BBs. The magazine "s case was made of steel.
The set does not include a battery and a charger.
The set includes_
- replica
- magazine
- manual
The replica"s receiver was made of strengthened nylon. Quality of the materials used results in the fact that it is very difficult to recognise on the first sight whether it"s plastic or metal. Effective signs of a model, calibre and Amoeba Airsoft"s logo were engraved on the receiver. Metal was used to produced the outer barrel, the flash hider, the stock tube and some small pieces. The pistolĀ grip, properly shaped, covered with non-slip texture which improves grip and comfort. The magazine release button was enlarged in order to make its usage easier.
The replica was equipped with a light plastic stock folded to the side. The battery is located in the upper part of the receiver. Access to a hop-up system regulation is achieved in a standard for this design way - by pulling the charging handle and opening the shell ejector..
On the 22mm RIS rail is situated on the top of the gun can mount tactical scope.
The outer barrel ends with a 14mm right-hand thread.
Amoeba Airsoft replicas make it possible to replace the spring quickly, with no necessity of dismantling the gearbox. The heart of the replica is a bit strengthened modified gearbox v. 2, which possesses an integrated EFCS module - Electronic Firing Control System. It controls the operation of the trigger mechanism, resulting in a very smooth work and shorter engine reaction. A standard trigger switch assembly was replaced by an electronic system. The EFCS also has a built-in MOSFET system.
EFCS considerably increases the mechanism"s life span and the whole replica as well and it allows to use high-voltage batteries, including LiPo. If we buy an outer dedicated EFCS programmer, we may receive a possibly to select fire modes as well as the burst mode (a three BBs series).
The magazine which goes together with the replica is a hi-cap with capacity of 300 BBs. The magazine "s case was made of steel.
The set does not include a battery and a charger.
The set includes_
- replica
- magazine
- manual
$272.06
AM-002 carbine replicaā
$272.06
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
A series of the latest Amoeba Airsoft replicas is based on a well-known design of AR type assault rifles, however these replicas have been considerably modified and enriched of many constructional details and interesting technical solutions, which improve not only their functionality but also their look. Thanks to its compact dimensions, AM-002 is very handy and constitutes a perfect tool during airsoft CQB actions.
The replica"s receiver was made of strengthened nylon. Quality of the materials used results in the fact that it is very difficult to recognise on the first sight whether it"s plastic or metal. Effective signs of a model, calibre and Amoeba Airsoft"s logo were engraved on the receiver. Metal was used to produced the outer barrel, the flash hider, the stock tube and some small pieces. The pistolĀ grip, properly shaped, covered with non-slip texture which improves grip and comfort. The magazine release button was enlarged in order to make its usage easier.
The replica was equipped with a light plastic stock folded to the side. The battery is located in the upper part of the receiver. Access to a hop-up system regulation is achieved in a standard for this design way - by pulling the charging handle and opening the shell ejector..
On the 22mm RIS rail is situated on the top of the gun can mount tactical scope.
The outer barrel ends with a 14mm right-hand thread.
Amoeba Airsoft replicas make it possible to replace the spring quickly, with no necessity of dismantling the gearbox. The heart of the replica is a bit strengthened modified gearbox v. 2, which possesses an integrated EFCS module - Electronic Firing Control System. It controls the operation of the trigger mechanism, resulting in a very smooth work and shorter engine reaction. A standard trigger switch assembly was replaced by an electronic system. The EFCS also has a built-in MOSFET system.
EFCS considerably increases the mechanism"s life span and the whole replica as well and it allows to use high-voltage batteries, including LiPo. If we buy an outer dedicated EFCS programmer, we may receive a possibly to select fire modes as well as the burst mode (a three BBs series).
The magazine which goes together with the replica is a hi-cap with capacity of 300 BBs. The magazine "s case was made of steel.
The set does not include a battery and a charger.
The set includes_
- replica
- magazine
- manual
The replica"s receiver was made of strengthened nylon. Quality of the materials used results in the fact that it is very difficult to recognise on the first sight whether it"s plastic or metal. Effective signs of a model, calibre and Amoeba Airsoft"s logo were engraved on the receiver. Metal was used to produced the outer barrel, the flash hider, the stock tube and some small pieces. The pistolĀ grip, properly shaped, covered with non-slip texture which improves grip and comfort. The magazine release button was enlarged in order to make its usage easier.
The replica was equipped with a light plastic stock folded to the side. The battery is located in the upper part of the receiver. Access to a hop-up system regulation is achieved in a standard for this design way - by pulling the charging handle and opening the shell ejector..
On the 22mm RIS rail is situated on the top of the gun can mount tactical scope.
The outer barrel ends with a 14mm right-hand thread.
Amoeba Airsoft replicas make it possible to replace the spring quickly, with no necessity of dismantling the gearbox. The heart of the replica is a bit strengthened modified gearbox v. 2, which possesses an integrated EFCS module - Electronic Firing Control System. It controls the operation of the trigger mechanism, resulting in a very smooth work and shorter engine reaction. A standard trigger switch assembly was replaced by an electronic system. The EFCS also has a built-in MOSFET system.
EFCS considerably increases the mechanism"s life span and the whole replica as well and it allows to use high-voltage batteries, including LiPo. If we buy an outer dedicated EFCS programmer, we may receive a possibly to select fire modes as well as the burst mode (a three BBs series).
The magazine which goes together with the replica is a hi-cap with capacity of 300 BBs. The magazine "s case was made of steel.
The set does not include a battery and a charger.
The set includes_
- replica
- magazine
- manual
